Monitor in use process is vulnerable to the interference of magnetic field, so don't put mobile phone instrument, so as not to affect the monitoring results.For wire equipment, must not be under pressure in patients with a certain part of the body, so as to avoid damage to the patient's skin.In turn, there is a big movement, sleeping of time don't care more pull wire electrode loss.Because some people for a long time of electrodes, the skin will have certain resistance reaction, such as skin rash, itching, at this time of the patients must inform medical personnel, replacement of paste electrode.But changing the electrode for a little while it is important to note that with stickers to wipe clean, the skin cutin layer to wipe clean.The monitor manufacturer below small make up give you tell me the steps of the monitor.

Steps:
1, boot, connected to the power supply, open the power switch
2, will each lead as opposed to a monitor should interface connection
3 and arrangement of electrodes
4, winding sphygmomanometer cuff or connection transducer
5, blood oxygen saturation probe was laid
6, set the parameters monitor
7, finishing with content, will lead to parlay coiling, properly fixed.
8, inform the patient and family considerations
9, observing, hand washing, record
A. Monitor the meaning and function
1. The monitor is a kind of to measure and control patients physiological parameters, and can be compared with the known value, if excessive alarm device or system.
2. Monitor and monitoring diagnosis instrument is different, it must be 24 hours continuous monitoring the patient's physiological parameters, check out the change trend, points out that the emergency situation, for the basis of the emergency response and medical treatment, the complications minimized alleviate and eliminate the disease.Monitor USES in addition to the measurement and monitoring physiological parameters, including the status of the monitoring and treatment before and after medication and surgery.
3. Monitor the optional parameters: the ecg, respiration, blood pressure (presence of gen and a gen two), blood oxygen saturation, pulse frequency, temperature, breathing at the end of the carbon dioxide, respiratory mechanics, anesthetic gasses, cardiac output (invasive and noninvasive) and brain electrical double frequency index, etc
2. Monitor clinical application: surgery, surgery, trauma care, newborn and premature infants, coronary heart disease, the critically ill patient, hyperbaric oxygen chamber, delivery room, etc.